CGF - Powered by Discuz! Board

標題: [others] Beta P-mag for WA system GBB [打印本頁]

作者: RCman 時間: 22-7-2011 12:23 標題: Beta P-mag for WA system GBB

之前係間離台見師兄話有款新P-mag WA system GBB匣賣。
滿心歡喜想去見下真身。
昨晚出去...見到幾間鎗鋪都有。
P-mag有BK, DE color, 仲見到有E-mag添！
不過...再睇下個膽......嘩！
Valve果條pin勁幻...而且成個內金屬比我覺得好粗糙...上面個導軌唔係wheels...只係用KA/ GP Gen1的差不多...

除左外皮真係膠....我睇唔出點解要買

我已經有GP P-mag Bk x3, DE x2....
可能買來做景品匣就得？
有無師兄買左？效果如何？

[ 本帖最後由 RCman 於 22-7-2011 12:24 編輯 ]

圖片附件: Pmag.jpg (22-7-2011 12:24, 34.01 KB) / 該附件被下載次數 119
http://www.wargamehk.com/cgf/attachment.php?aid=140058

作者: lololo 時間: 22-7-2011 22:04

有ching話頂bolt, 又見2手區甘快有人放.....我死心了~~

作者: RCman 時間: 22-7-2011 22:47

引用:

原帖由 lololo 於 22-7-2011 22:04 發表
有ching話頂bolt, 又見2手區甘快有人放.....我死心了~~

我無買，因為見個質數仲差過AGM...要成4百？？？
緊係睇定D啦...反正我有5個猪標金身P-mag..用得好好

作者: lololo 時間: 22-7-2011 22:50 標題: 回覆 3# 的帖子

金身P-mag我都有6隻, 個人感覺比Prowin還要好用

作者: RCman 時間: 22-7-2011 22:52

引用:

原帖由 lololo 於 22-7-2011 22:50 發表
金身P-mag我都有6隻, 個人感覺比Prowin還要好用

我無ProWin,我有"爆炸"
都覺得金身P-mag唔錯，
相容度高，
我幾支KA, GP用都無問題。

作者: JBL 時間: 22-7-2011 23:31

提示: 作者被禁止或刪除內容自動屏蔽

作者: dennislau1 時間: 22-7-2011 23:45

Actually I think the Beta Project Pmags are ok. Using my blow back monster (Steel bolt + heavy buffer) Can clear mag with single shot without problem. Have not tested auto shot but i think it should also be fine. Still plenty of gas after clear mag. The mag gets cold after use, but not as dramatic as become watery.

The advantage is really light, and also up to standard WA size (same as G&P, bomber etc). So it is ok to interchange with WA system actually.

The disadvantage is it required removing the lower plate for charging gas. And the fact that my friend is selling me G&P mags relatively cheap (because they leak and etc) I just dont want these anymore.

[ 本帖最後由 dennislau1 於 27-7-2011 23:38 編輯 ]

作者: 桸藍 時間: 22-7-2011 23:46

i use it for take photo

作者: dennislau1 時間: 22-7-2011 23:48

On a side note, i found Prowin 2 is not exact WA dimensions. The 出氣膠 is slightly higher than the rest and sometimes the valve cut mechanism interfere with the bolt causing dents to the bolt or wheel, about 0.5 - 1mm.

Any ching have experiences to solve this?

作者: red_ant_tony 時間: 23-7-2011 07:27

How do you guys find the GP Pmags? Would leaking be a major problem?

作者: mujiadam 時間: 23-7-2011 08:39

插GP 既WOC系列/BOMBER....緊到近乎入唔到....

作者: felix923hk 時間: 23-7-2011 13:47

我wocx kit 插係緊d 不過ok,可接受, 反而ghk匣我入唔到....
e隻pmag我用到, blowback 唔錯
單係真係p已經值回票價

[ 本帖最後由 felix923hk 於 23-7-2011 15:05 編輯 ]

作者: hung 時間: 24-7-2011 10:11

我都有3隻豬標金身p-mag ,

2沙1黑用到而家效果都好好 , 但聽老友講最新呢款膠身p-mag會頂bolt , 所以暫時放棄購買計劃 !

作者: joeyjordisonhin 時間: 27-7-2011 23:14

咁我都係睇定d先...

作者: dennislau1 時間: 27-7-2011 23:38

Just tested. 30 rounds only.

作者: mk23 時間: 27-7-2011 23:38

朋友的Bomber成品 SR16+井勝Blot, 鼎到打唔到. 打一槍jam一槍.
用返PGC匣就完全無問題......

作者: lololo 時間: 28-7-2011 00:06

朋友買了一隻用於原裝KA M7A1上, 唔頂bolt, 每3秒點放auto2-3發....打唔晒30飛....
用PGC, boomber 一Q清匣完全無問題

作者: 天道 時間: 30-7-2011 11:49

我隻PGC V2版..如果打吊雞的話,gp可以差不多兩Q,上年買未玩過的WA全完裝做到3Q,真係非常正!

作者: hung 時間: 9-8-2011 19:37

金身 p mag 係 ka 軍版原裝手吊3連發 , 出彈係好順

歡迎光臨 CGF (http://www.wargamehk.com/cgf/)