CGF - Powered by Discuz! Board

標題: 有千五蚊左右既budget想搞下把槍 [打印本頁]

作者: wokika 時間: 30-6-2007 01:42 標題: 有千五蚊左右既budget想搞下把槍

出糧啦！出糧啦！.....

有千五蚊在可改下把槍..

各位師兄左乜意見呀...

Marui M4A1 S-System (暫時都仲係全原裝料) (頭重尾輕+有乜力水) (十零米就飄飄下)

Marui Glock 17 3rd Generation (暫時都仲係原裝料) (基本上冇乜缺點，但想可以大力d)

順便問一問，下個月(七月)又有多千五蚊，想買支MP7A1(都係Marui)....(因為支m4真係太重...)

想問一下有冇師兄可以點評下lee支槍同埋，

只帶MP7A1和Glock 17落場唔會唔唔夠火力呀？

and MP7A1 有冇地方要"執"下？

thank you for any help and reply....

作者: LifeAfterDeath 時間: 30-6-2007 02:37

well first of all... if you like MP7 then I would say save up all the money until July... then you will have $3000 to work on your MP7... and what know of power you go for it? 1J/1.5J/1.9J???

but if you want to work on your TM M4 S-System... then you can easy spend more then $3000 for it...
and since you don't really like M4 S-S... then you could buy the GnP M4 RAS set (with outter barrel...) this set already around $950... and you can get a better spring for around $60 and new gear set... and change your M4 to put battery at the stock... not in the Rail... this will also fix your problem...

作者: 14692 時間: 30-6-2007 05:10

MP7落field....會死得好甘

作者: 阿堅 時間: 30-6-2007 11:33

唔....要MP7不如要P90 MP5好過LA.....
MP7槍管短...打近....中又唔夠MP5 P90 果D打
MP7打CQB就話好姐

作者: LifeAfterDeath 時間: 30-6-2007 11:55

引用:

原帖由 Ａｔｅ１２０ 於 6/30/07 11:33 發表
唔....要MP7不如要P90 MP5好過LA.....
MP7槍管短...打近....中又唔夠MP5 P90 果D打
MP7打CQB就話好姐

P90 is better...

作者: tam_sir 時間: 1-7-2007 00:59

MP7除打近距離外絕對唔夠火力,
我支MP7改了VSR110彈弓(一面裂),單向拍頭,外接1500mah電,落場可以比人接子彈,

作者: wokika 時間: 1-7-2007 01:00

Marui M4A1 S-System (暫時都仲係全原裝料) (頭重尾輕+有乜力水) (十零米就飄飄下)

想改到 1.5 to 1.7 左右...應該要搞d乜先呀？

作者: LifeAfterDeath 時間: 1-7-2007 01:13

引用:

原帖由 wokika 於 7/1/07 01:00 發表
Marui M4A1 S-System (暫時都仲係全原裝料) (頭重尾輕+有乜力水) (十零米就飄飄下)

想改到 1.5 to 1.7 左右...應該要搞d乜先呀？

1st gear set... M120 spring... full upgrade your gearbox will do... around $1000... unless you want to change motor then more money to spend...

also you can put the batteries at the stock... it will balance it...

作者: wokika 時間: 1-7-2007 01:36

full upgrade your gearbox
what parts i need to change and

with brand have stock batteries and the price

作者: LifeAfterDeath 時間: 1-7-2007 01:42

引用:

原帖由 wokika 於 7/1/07 01:36 發表
full upgrade your gearbox
what parts i need to change and

with brand have stock batteries and the price

here is something you can look for it...

remember you don't have to buy set... you can buy it one by one... and make sure you ask the shop b4 you buy anything...

and the stock... GnP M4A1 Extended Battery Buttstock (Black) for Marui M4 Series

作者: wokika 時間: 1-7-2007 01:45

how much about the GnP M4A1 Extended Battery Buttstock (Black) for Marui M4 Series

and what are your suggestion about GLOCK17

作者: wokika 時間: 1-7-2007 01:47

LifeAfterDeath

can you check your message box, i have something PM to you.

THX a lot

作者: LifeAfterDeath 時間: 1-7-2007 01:50

引用:

原帖由 wokika 於 7/1/07 01:45 發表
how much about the GnP M4A1 Extended Battery Buttstock (Black) for Marui M4 Series

and what are your suggestion about GLOCK17

well the stock should be somewhere around $500... (not really sure since I don't use it)

and about GLOCK17... you better ask some other brothers... since I only after M92F and Hi Capa 5.1...

作者: LifeAfterDeath 時間: 1-7-2007 01:51

引用:

原帖由 wokika 於 7/1/07 01:47 發表
LifeAfterDeath

can you check your message box, i have something PM to you.

THX a lot

I think I did reply u already...

作者: wokika 時間: 1-7-2007 01:57

thx for your help first

how about the GLOCK17..

作者: LifeAfterDeath 時間: 1-7-2007 01:58

引用:

原帖由 wokika 於 7/1/07 01:57 發表
thx for your help first

how about the GLOCK17..

sorry pal... I can't really help on this... you have to wait for someone to reply you or go "Gun Street" to ask about it...

作者: LifeAfterDeath 時間: 1-7-2007 02:00

one more question... do you know how to open your gearbox or do you have any idea about your airsoft?

作者: wokika 時間: 1-7-2007 02:05

i have check a lot of document about gearbox before...

作者: LifeAfterDeath 時間: 1-7-2007 02:05

引用:

原帖由 wokika 於 7/1/07 02:05 發表
i have check a lot of document about gearbox before...

good for you then you can go nuts...

作者: wokika 時間: 1-7-2007 02:08

thx for your

but i think i have lot of question after i "doing" the gearbox

作者: LifeAfterDeath 時間: 1-7-2007 02:11

引用:

原帖由 wokika 於 7/1/07 02:08 發表
thx for your

but i think i have lot of question after i "doing" the gearbox

remeber to get a DC and take as many photos as you can... since if you have anything goes wrong you can recall the pictures... and for the first time... better off to have 4-5 hrs to do the work... since first time is not gonna be easy for everyone...

作者: wokika 時間: 1-7-2007 02:26

DC and

anything elas..

作者: LifeAfterDeath 時間: 1-7-2007 02:28

引用:

原帖由 wokika 於 7/1/07 02:26 發表
DC and

anything elas..

nothing much... and check out my PM I think you will know what are you doing when you open up your gearbox...

作者: wokika 時間: 1-7-2007 02:38

i have already check your PM thx

作者: wokika 時間: 1-7-2007 02:41

what thing i need to buy in first step....

作者: LifeAfterDeath 時間: 1-7-2007 02:52

引用:

原帖由 wokika 於 7/1/07 02:41 發表
what thing i need to buy in first step....

follow this picture...

Xystema M120 spring or other brand with same kind of power ($80)
1st gear set (around $400)
GnP Piston ($100)
Cylinder, Piston head, Air Nozzle, Spring Guide... etc...

作者: wokika 時間: 1-7-2007 03:26

can you gave me the parts name in chinese....

作者: LifeAfterDeath 時間: 1-7-2007 04:59

引用:

原帖由 wokika 於 7/1/07 03:26 發表
can you gave me the parts name in chinese....

sorry I really donno... you could ask some other brothers...

歡迎光臨 CGF (http://www.wargamehk.com/cgf/)