-l-

引用:

原帖由 peter9999 於 11-12-2008 13:55 發表

呢個都靚啊 咁請問係咪個前準星要折走呢？

Yes, you need to remove the triangle front sight and replace it with a low-profile gas block

-l-

引用:

原帖由 loop2 於 11-12-2008 14:09 發表



Bro, So,in the picture That should be 10" not 7" am i right?

I think that is a 9.5", however some brother reported that the other barrel of WE is actually a bit shorter than 10.5". So, the flash hider may a bit "sink" inside a 9.5" rail.

-l-

引用:

原帖由 peter9999 於 11-12-2008 15:40 發表

但小弟已經將外管"令"到花晒，都未能分開到，請指教下  

我果條都花晒都吾得...
跟往用d非常方法至得...

假如你有Voltor sight tower之類吾洗lock pin位嘅前sight,你可以裝多個sight落條加長外管到再渣住兩sight(A字sight+ voltor sight)個尼用力

[ 本帖最後由 -l- 於 11-12-2008 16:43 編輯 ]

-l-

引用:

原帖由 loop2 於 11-12-2008 16:43 發表

Thanks,但今次真係想用真品整支靚少少既玩具槍,anyway,禾去looklook先

I think only black version of DD7"omega is available. I got the CNC replica of it, let me try to fit it on tonight and see if it fits.

-l-

實用post--fit吾fit,點樣改
http://www.warjunkies.org/viewth ... &extra=page%3D1

-l-

引用:

原帖由 路比 於 11-12-2008 23:59 發表

我都想切呢個款 不過用10.5"

Haha, I just did it yesterday

-l-

引用:

原帖由 peter9999 於 12-12-2008 10:21 發表

整好貼相睇下可以嗎  

no problem I will try to take a photo tonight

-l-

引用:

原帖由 peter9999 於 12-12-2008 16:12 發表

期待  

sorry to keep you waiting Pete, there you go.
I just fielded this baby in her first game tonight with a customized valve to reduce the power down to 1 face power only. She works smooth as silk after I tuned it to the suitable hop up.

-l-

something info on internal modification


you can file(磨) away the sharp corner pointed by the BLUE arrow, this should stop the bolt stretching the brass cylinder which is the cause of the production of metal dust inside the bolt  

if you want to reduce the power of your M4 the valve (pointed by the ORANGE arrow) is the part you need to replace, I have already change it to a customize one with 2x 4mm holes

[ 本帖最後由 -l- 於 13-12-2008 20:33 編輯 ]

-l-

引用:

原帖由 優之涼粉 於 13-12-2008 21:35 發表
想請問有無師兄裝過Daniel Defense MK18 RIS II SOCOM 9.5"或Daniel Defense M4 Rail 9.0???

駛唔駛大執先裝到???

http://www.warjunkies.org/viewth ... &extra=page%3D1   <--- I think it included fitting information of both copy and real DD RIS II

-l-

引用:

原帖由 alex1219 於 14-12-2008 01:50 發表
唉~ 治標唔治本...
啞鉛handle.... 換得一次就會有第二次....
唔知仲要換幾多次~

新果支cocking handle應該係新料wor

-l-

引用:

原帖由 路比 於 14-12-2008 01:06 發表
聽講偉大的祖國已經copy緊呢枝gbb m4

咁會吾會copy埋d售後服務呀

-l-

Alright alright, tried a few new things

steel bolt lock- lock and release it about 120 times, still in good shape not deformed like the original one. However it just refuse to lock in most of the time semi or auto, may be the spring in the may that pushes the bolt lock is not strong enough to push the heavier steel bolt lock. A solution is yet to be discovered.


New method to reduce fps- all you need is a 7mm bearing from an AEG gear box, plastic one preferably.(thank ASGK for providing this method)

The theory is simple  the bearing act as a spacer and pushes the valve forward, hence less gas in allowed into the chamber. I tried to shoot a few rounds and the power is dramatically reduced even though mine M4 is the AFC local version that shoots 400fps+. I don't know if there is any long term problem cause by doing this mod, so DO IT AT YOUR OWN RISK!

-l-

引用:

原帖由 Hkpolice-Psu 於 4-6-2009 12:04 發表
正

oh I am lovin' it