Elf

多謝JPG兄

我驚麻煩, 最後都係買左MOE而唔係MIAD, 希望唔洗就住就住咁摩都得

Elf

引用:

原帖由 siupo 於 17-5-2011 19:52 發表
btw seems like u didn't use any screw to tide up the cap at the bottom. how did u manage to keep the grip in place? r u using a modified ptw plate to hold the grip?

he drills 4 holes on the MIAD bottom plate, identical locations to the ones on the original plate and screw the 4 hex screws through the MIAD plate onto motor.

Elf

引用:

原帖由 jpg 於 17-5-2011 19:38 發表
其實挫前GRIP 位, 最好係上落隻GRIP 到挫, 咁就唔駛驚挫多左, OR 唔會挫爛.

反而覺得用MOE, 唔就位, 仲難挫..

早知買MIAD..

Elf

等我番香港之前入番個MIAD先

Elf

理論上清唔清無乜分別?

Elf

引用:

原帖由 jpg 於 19-5-2011 03:37 發表


哈哈, 咁又係, 都係焊兩點者, 幾秒鍾既事...

果個死人摩打焊位....
我次次焊都要拎出去俾車仔鋪整, 因為我屋企個隻唔夠熱

Elf

我隻得40W. 次次都要contact好耐先開始熔, 但係熱力已經傳晒去其他位, 成隻摩打都熱.