AICSman

引用:

原帖由 screwupman2022 於 3-1-2019 00:17 發表

點樣not so reliable法，願聞其詳

one reason is the older 1911 internal part are cast metal. it requires experienced gunsmith hand sanding and polishing.  The new 1911 most part are CNC cutting now.

AICSman

一致好嘅1911,最緊要係fitting要緊同smooth. Trigger 一定要清脆又唔可以過重 , 1911 trigger 冇彈弓, 係用1片內行人叫3finger鐵片,同一粒叫sear嘅組合以控制trigger. 就係以上依兩點都要有好嘅手槍工匠Polish 同cutting sear angle. 如果sear angle cut得唔好把手槍有可能會響唔小心嘅情況下走火同埋連發兩下. 一支靚嘅1911會好貴貴在就係手工,同工匠手藝