22 12
發新話題
打印

小弟想改裝馬記沙鷹~請高人指點~

I dont really know what you want but here's a rough list for some basic modifications
using existing parts:

-KM hammer set
-fire fly/nineball High flow Valve
-firefly nozzle
-nine ball recoil spring (or KA 170%)
-nine ball hammer spring (or KA 170%)
-nine ball 6.03 barrel
-Guarder loading muzzle
-Guarder aluminium alloy frame set
-Guarder steel sights set
-Guarder steel slide lock

mind that some parts do not have post market upgrades or are long discontinued, such as the hob up rubber and the loading muzzle hose, when these break you'll need to buy 1 more marui desert eagle for parts. You can also consider custom parts if you can afford them.

TOP

引用:
原帖由 DACKY_HO 於 17-6-2009 21:36 發表
即係點!?!?!?
者係叫你諗下有冇可能用一大淡氣可以做到.50打出來果個bolw back.

TOP

又要大Blow Back, 又要大力
D人咁貪心o既....
如果樓主明白氣動結構的話
就應該唔會問呢個問題
氣動結構上
基本上兩者只能生存一者
要大Blow Back 就無Power
要Power就無大Blow Back

TOP

晒氣既人...用既槍都要晒氣
用勁多氣推彈....用勁多氣blowback

TOP

del

TOP

引用:
原帖由 DACKY_HO 於 19-6-2009 01:08 發表
私人理由只會揀馬記沙鷹改~
唔係話要改到真槍果種power同blowback,小弟亦心知模型槍同真槍既天淵之別,所以從來不想點樣可以改到真槍級質素,而只想從模型GBB角度用最合適既PARTS改至枝槍個blowback力最高&合法火力下 ...
你打咁大篇野做乜~?
路比兄肯答你算你好彩~
我只會問你~你知唔知自己用緊o既gas幾多磅~??
用得o個12磅氣點做到又大力又大blowback~???
換170% hammer spring同recoil spring的話根本唔洗上來問~出槍街走走都知啦大佬~!
F1 , A1 , 300V , 400D , 3 , 1Ds2  , 1D4 / NEX-5N , A7 / X2
17-40L , 28-90II , 18-55II USM , 17-55IS USM , SSWIS /  E18-55 , FE24-70za , FE16-35za
24.4L II , 50.2L , 50.4 , 100/2 , 456L / FD55.2 / FL50.4 / VM40.4 / G35 , G45 / E16 , E30 , E50 , FE55za
580EX II , 430EX II / Metz52

TOP

感謝各位誠心回覆的版友~你們的意見使小弟獲益良多~

TOP

 22 12
發新話題