F22

引用:

原帖由 red_ant_tony 於 6-4-2011 07:25 發表


Thanks for your comments. This is surely a good solution.

Anybody got a good way to deal with the wearing out of the bolt locking area on the carrier?
I have been filing the part whenever it g ...

我啲英文都係半桶水,唔係好明你指邊度.........

IMG_3436.JPG (48.24 KB)

6-4-2011 07:48

IMG_3439.JPG (28.93 KB)

6-4-2011 07:48

可以指邊度有問題嘛?

nok7689

已經用原裝試...估計係BOLT低磨左條坑出黎..連發時BOLT低因為有條坑係到頂唔返個擊鎚個扣去前面
所以個扣仲扣住左

F22

引用:

原帖由 nok7689 於 6-4-2011 08:29 發表
已經用原裝試...估計係BOLT低磨左條坑出黎..連發時BOLT低因為有條坑係到頂唔返個擊鎚個扣去前面
所以個扣仲扣住左

有冇試過機件呢?
1.甩匣
2.撥連發
3.扣實板機
4.拉上膛捍
5.慢慢放回上膛捍,聽吓hammer有冇响條bolt回位之前彈起..........

nok7689

其實撥去連發....扣實板機...再係隻匣位望入去..佢推出氣個舊野有無出黎得唔得...
岩岩睇左...單發個時佢推曬出黎..連發推得一半...咁可以點搞搞佢~
新手玩GBB唔係好知D名詞~唔該曬

[ 本帖最後由 nok7689 於 6-4-2011 09:46 編輯 ]

red_ant_tony

Sorry my fault. I could only type in English......
I mean the position of the screw on picture 2.....
Did you put your own screw in or it is the one by Iron airsoft....?
Mine is a prime bolt carrier.....and they don't have screws.

F22

引用:

原帖由 red_ant_tony 於 6-4-2011 20:45 發表
Sorry my fault. I could only type in English......
I mean the position of the screw on picture 2.....
Did you put your own screw in or it is the one by Iron airsoft....?
Mine is a prime bolt carrie ...

嘩,乜你咁好眼睇得出係416條bolt? 粒螺絲冇錯係我自己上.......
咁你條prime bolt係鋁定鋼呢?可以燒焊救番喎........

red_ant_tony

I guess only bolt carriers made by iron airsoft have screws on them.....that includes 416 / Adams arms / POF bolt carriers.
I have both steel and aluminium bolts made by Prime. They all have the same problem after using for a while......
How do you drill such a small hole over that area??

F22

引用:

原帖由 red_ant_tony 於 7-4-2011 21:17 發表
I guess only bolt carriers made by iron airsoft have screws on them.....that includes 416 / Adams arms / POF bolt carriers.
I have both steel and aluminium bolts made by Prime. They all have the same ...

我只有Prime steel bolt,因為係鋼所以可以燒焊救番,鋁bolt都可以燒,不過效果冇鋼咁好..........

IMG_3635.JPG (97.23 KB)

8-4-2011 07:42

IMG_3639.JPG (96.11 KB)

8-4-2011 07:42

我呢條bolt 燒焊後已經打過超過百幾匣,都只係個角圖咗啲啲...........  prime鋼bolt係唔平,但可以燒焊乜都抵返晒........

IMG_3640.JPG (102.61 KB)

8-4-2011 07:42

IMG_3643.JPG (131.58 KB)

8-4-2011 07:42

IMG_3645.JPG (162.54 KB)

8-4-2011 07:42

將bolt stop 做啲手腳,响底部內側磨個斜位令佢彈得更高,可令lock bolt更實在,可靠.........

red_ant_tony

Wow.....I guess you're really skillful. You even have welding equipment at your disposal.......
I'm still thinking about drilling a hole and putting a screw in.
Could you show me the area which you have modified on the bolt stop? Thanks.

F22

引用:

原帖由 red_ant_tony 於 8-4-2011 20:51 發表
Wow.....I guess you're really skillful. You even have welding equipment at your disposal.......
I'm still thinking about drilling a hole and putting a screw in.
Could you show me the area which you  ...

其實我係比個老友燒.........
要响條鋼bolt上面鑽個細窿仔可以話高難度動作,都係燒焊好,而且燒過之後會比原裝更硬..........
bolt stop改法:

IMG_3139.JPG (40.78 KB)

9-4-2011 08:41

拆隻bolt stop出嚟大約係咁角度磨斜位..........圖為KA...........

IMG_3137.JPG (53.33 KB)

9-4-2011 08:41

另一角度可以睇清楚啲..........

nok7689

22兄~有無空幫我諗諗可以點搞~~

F22

引用:

原帖由 nok7689 於 9-4-2011 09:16 發表
22兄~有無空幫我諗諗可以點搞~~

有冇相睇?只係文字好難諗..........

red_ant_tony

It is indeed a good method - to let the bolt stop rise a bit higher.....but my main problem still lies on the wearing of the bolt.
I don't have welding equipment nor that I know anybody who has.....I guess drilling a hole and putting a screw in is a better alternative.
Thanks for your info anyway.

nok7689

我諗我直接換鋼bolt試試先，反正都磨損左，prime bolt 大約幾

red_ant_tony

Prime steel bolt - $12xx-13xx
I would suggest using the stainless steel version....appears to be more durable. (I have both steel and stainless steel bolts)